When a signal is received, the scan is interrupted and will return to scan mode approxi- mately 5 seconds after reception is terminated. Be careful not to use excessive force. Force programming a transmitter, removing a transmitter, or reprioritizing a transmitter is covered later in this manual. This means other groups may be talking on any of the channels. Refer to the appropriate section of this manual for de- tailed operating instructions for each mode.
In addition, the receiver also allows driver priority function. This driver priority function takes place when ever a particular transmitter is used to unlock the vehicle regardless of the selection of one button or two button operation. Simply rotate the clip in either direction to the horizontal position. When the minimum and maximum volume settings are reached, a unique tone will sound. The following indicates the receiver programmable slots. Before trans- mitting on the selected channel, press the Monitor M Button 2 to check the activity on that channel. Roger Beep Tone Indicator: This icon appears when the Roger Beep tone is on, and disapppears when the tone is not in use.
In this way, whenever the transmit- ter is used to unlock the vehicle, channel 6 or 7, when programmed, will provide a pulsed ground output. . The display will indicate the current volume level V the number 0-7. While scanning, you can transmit and receive. It will however operate for any single button programming. Use in other countries may be prohibited or restricted by local regulation. Please check with the local regulating agency be- fore using this device outside the United States of America.
Using low power, the unit will have a lower transmit range, but battery life will be increased. If the unit is not to be used for an extended period of time, remove the batteries. Do not mix alkaline, standard carbon-zinc or rechargeable batteries. This button may not be used to operate a receiver channel. This output can be connecter to the driver priority function of the vehicle to reset preset user features.
Please consult with your installation centers technician to see if this feature is available in your vehicle. This transmitter is also capable of one button programming for certain model Audiovox Alarms. As volume is increased upward, the unit will beep at each step, and vice-versa. . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . .
. . . . .