Default Setting: Not set Strong Password Allows you to enforce the option to always set strong passwords. Connect the fan cable to the system board. Insert the modem connector in the slot. Affix the mylar tape to secure the keyboard data cable to the back of the keyboard. Follow the procedures in Before Working On Your Computer. Flip the computer and remove the screws that secure the keyboard. Installing the Display Function Board 1.
In this mode, the Operating system switches automatically between the available pointing device according to its internal priority and attributes. Read and follow the safety instructions that came with the product. Remove the display hinge cap from the display hinge. Remove the hard drive assembly. If you press before you are prompted, this keystroke will be lost. Default Setting: Enable F12 Boot Option Menu Fastboot Allows to set the option to speed up the boot process. Pen Flicks Pen flicks allow you to use the pen to perform actions that normally require a keyboard, such as pressing or using the directional arrow keys.
Connect the display power cable to the connector. Remove the hard drive assembly. The writing pad and character pad have a number pad, a symbol pad, and web quick keys to help you quickly and accurately enter these types of text. Attach the display hinges to the display back cover. Hold a card by its edges or by its metal mounting bracket.
The standard keyboard touch pad are present, plus you can opt for the electrostatic pen or just use your finger as an input device Using Pen as a Mouse You can use the pen the same way you use a mouse or touch pad with a notebook computer. Maintenance Service Tag Displays the Service Tag of your computer. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. Device Manager — Digitizers b. Attach the display hinge cap to the display hinges. Remove the hard drive assembly. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Replace the hard drive assembly. Connect any external devices, such as a port replicator, battery slice, or media base, and replace any cards, such as an ExpressCard. Place the display panel onto the keyboard. For additional safety best practices information, see the Regulatory Compliance Homepage at www. Number of touch points should be written in the information window. Follow the procedures in Before Working On Your Computer. Remove the hard drive assembly.
Connect any external devices, such as a port replicator, battery slice, or media base, and replace any cards, such as an ExpressCard. If the device is recognized, try to uninstall the N-trigbundle and reinstall. Check if the N-trigbundle is installed. Icon Name Function Hand The writing pad and character pad convert handwriting into typed text. Flicks Gesture activated shortcuts for common Yes No tasks. If the computer is connected to a docking device docked such as the optional Media Base or Battery Slice, undock it. Use the character pad to enter one character at a time.
To switch to the character pad in Input Panel, tap Tools, and then Write character by character Touch keyboard — The touch keyboard is like a standard keyboard, but you enter text by tapping the keys with your tablet pen or finger. Once the F2 prompt appears, press immediately. Dell provides several online and telephone-basedsupport and service options. Attach the display function board cable to the display back cover. When you use Touch Mode, a translucent image of a computer mouse, called the touch pointer, floats beneath your finger. Follow the procedures in After Working Inside Your Computer.
Disconnect the smart card reader and bluetooth cables from the system board. Tighten the screws to secure the fan to the system board. If you want to quickly view the content of pages found on the following pages of the manual, you can use them. Installing the System Board 1. Installing the ExpressCard Reader 1. Flip the computer and remove the screws that secure the palm rest. Remove the display closure sensor from the computer.
As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Tighten the screws to secure the display power board. Disconnect the smart card reader flex cable from the system board. . Each time you press and release the screen rotate button, the screen image rotates clockwise 90 degrees.